Rahasia Ponsel CDMA SAMSUNG Dan NOKIA

[sukirman]

Ketika adik saya memiliki ponsel CDMA untuk salah satu produk operator dan ponsel CDMA yang sekarang lagi booming promosi, saya menemukan beberapa dokumen-dokumen yang menarik untuk disimak dan dikumpulkan, sehingga Anda bisa membacanya.
Dibawah ini adalah sebagian dari beberapa rahasia ponsel CDMA yang beredar dipasaran. Penulis tidak bertanggung jawab atas segala akibat yang ditimbulkan. Karena penulis menyampaikan hanya untuk kepentingan ilmu pengetahuan saja. Sebaiknya Anda berhati-hati.

CDMA Merk SAMSUNG
Samsung sph-n240, n400, a460, a500, etc:
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok

Samsung sch-411, 611, n105, a100, a300, a2000, etc :

Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69

Samsung a300, a530, a610, a620, a660, a670, etc :

Nam Set: Menu, 6, *
Service Menu: Menu, 9, *
Test Mode: 47*68#13580

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc :
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#

Nokia 8887 Nam Programming :
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#

Nokia 8587 Nam Programming :
Nam Set: *#626#7764726#
A-Key: #8159357022#4579# (26 digits)
A-Key: #8159357022#4547# (20 digits)
Version: *#0000#
Version: *#837#
Vocoder: *#3872#
Change language: Menu 5, 3, 1
Change DM mode: *#7678#
Debug Screen: *#8378#
Debug: *#8380#
Field Test Menu: *#83788#
SPC Unlock, Factory Reset :
Full Factory Reset: *#7370#
Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:
51xx, 61xx, 71xx, 3285, 63xx, etc :
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says “Field Test” and choose SELECT
3) Highlight “Enable” and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll down to “Field Test” choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says “Field Test” choose SELECT. Press 0 0 and then choose OK.

3360, 6360 :
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says “Field Test” and choose SELECT
3) Highlight “Enable” and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll down to “Field Test” choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
“Field Test” choose SELECT. Press 2 1 0 0 and then choose OK.
Untuk yang versi Bahasa Indonesia dan hape yang lain harap bersabar yah! heheh….

[sukirman]

Alcatel
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

Bosch
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

Dancall
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
SIMcard serial number: * # 9 9 9 4 #
Information about battery status: * # 9 9 9 0 #
Selftest (only Dancall HP2731): * # 9 9 9 7 #
Show version configuration: * # 9 9 9 8 #
Net Monitor: * # 9 9 9 3 #

Ericsson 6xx/7xx/8xx
IMEI number: * # 0 6 #
Software version: > * < < * < *
Default language: < 0 0 0 0 >
Enter to phone menu without SimCard - after Wrong PIN press NO: * *
0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Ericsson A1018S/T10S/T18S/T28S
IMEI number: * # 0 6 #
Software version: > * < < * < *
Default language: < 0 0 0 0 >
Enter to phone menu without SimCard - after Wrong PIN
press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Hagenuk (Duet)
IMEI number: * # 0 6 #
Software version check: # # 9 1 4 0 * 8 3 # 7 5 * 2 #
Motorola
IMEI number: * # 0 6 #
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK] * - press this until box
shown up

Maxon
*#9988# Tetris Play
*#9900# Software Version
*#9911# L1 Debug on/off
*#9916# Text (scroll trough with up/down)
*#9937# Discharging battery
*#9958# Watch stop
*#9959# Watch start
*#9960# Contrast set
Lock status *#9917#

NOKIA 5110/5120/5130/5190/6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI

Nokia 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

Philips
IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #

Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset memory (SIMLOCK`a removing!!!): * 2 7 6 7 * 3 8 5 5#
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #

Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #

Siemens C25/S25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press
LONG KEY
Bunus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power): Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red
phone, Menu 5 6

Sony
IMEI number: * # 0 6 #
Software version: * # 8 3 7 7 4 6 6 #
Show list of product creator names (you must save this number in
your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2
1










Samsung sph-n240, n400, a460, a500, etc Nam Programming:

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok



Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69



Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming:

Nam Set: Menu, 6, *

Service Menu: Menu, 9, *

Test Mode: 47*68#13580



Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam
Programming:

Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680 (88 - efs clear)

Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415



Samsung N356 (India version) Nam Programming:

Test Mode: Menu, 5, down arrow, *

Test Mode: **00## (in some flashes)



Samsung i700, etc Nam Programming:

Nam Set: Go to start and select "PHONE" from the drop down menu,
dial #83587


Samsung i300, etc Nam Programming:

1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice




TEST MODE COMMANDS:

n105_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt







<>


---------------------------------------------------------------------
-----------

Qualcomm qcp-800 Nam Pogramming:

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc



Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok



Tips:

On some kyocera handsets the factory service module has not been
disabled

and the phone can be programmed without the spc by inputting.

Nam Set: ##333333 menu (service)







<>


---------------------------------------------------------------------
-----------

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:

Nam Set: ##Spc+Ok+Key Down+Ok

Advanced Setup: ##3282+Ok+Key Down+Ok+Msl

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)



Sanyo scp-A011, smp-A017, etc Nam Programming:

Nam Set: F9(3 beep) + 0*72696#767







<>


---------------------------------------------------------------------
-----------

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#



Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#



Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#



SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)





NOKIA TEST MODE:



51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it
says

"Field Test" choose SELECT. Press 0 0 and then choose OK.



3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it
says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.







<>


---------------------------------------------------------------------
-----------

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:

(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power



Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code

129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range



Audiovox pcx-3500xl Nam Programming:

Nam Set: ##2726+Send+1998+1+Spc+1



Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc



Audiovox 8610, 8910, etc Nam programming:

Name Set: ##847446, end, 111111



Audiovox-107 Nam Programming:

Nam Set: 45680*47*869#1



Audiovox CMP-3 Nam Programming:

Nam Set: 45680*47*869#1

Dm Mode: Menu, 6, 6



Audiovox 9950 Nam Programming:

Nam Set: ##3282



Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming:

Nam Set: m + # + envelope key + * + 1



Audiovox Thera (Toshiba 2032) Nam Programming:

Thera Nam Programming User Manual - nam_thera.pdf





AUDIOVOX TEST MODE:



9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light

turns off press RIGHTARROW, 0, 0. The phone will ask for the

"FSC Code", press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.

2) The signal strength is the number on the top right hand side of
the screen.

3) To turn off test mode shut of the phone and then turn it back on.







<>


---------------------------------------------------------------------
-----------

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto



Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284



Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it
correctly)





Motorola t182, c210, etc Nam Programming:

Nam Set: ##1111 end

Nam Set: ##298645665 end

Short Nam: ##073887 sto



Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#



Motorola StarTac 2004 Nam Programming:

Nam Set: 5759789*#, rec key (3)times (spc - 915037)



Motorola ms200, ms230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)



Motorola v6060 Nam Programming:

Nam Set:147*369#456*0#





MOTOROLA TEST MODE:



v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press
000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of
the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then
follow

the above sequence and scroll down to where it says "DISABLE"
instead of

"ENABLE" and choose select.







<>


---------------------------------------------------------------------
-----------

lgc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**



lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**



lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**



lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**



Lg LX,VX-series, VX4400, VX6000, etc Nam Programming:

Nam Set: ##Spc

Nam Set: Menu, 0

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786,ok







<>


---------------------------------------------------------------------
-----------

Sky All Models Nam Programming:

Nam Set: #7583538324#626#

Nam Set: *759#364*7388464#

Min simple mode: #758353266#646#

Irm simple mode #758353266#476#

Voice memo: #8767#277#

Test Mode: #7583538324#8378#

A-key: #758353266#2539#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc







<>


Withus wce-100, 200, 300, etc Nam Programming:

Nam Set: ##948487+Save

Nam Set: ##948482+Save

Nam Set: ##66835+Save

SMS Settings: ##76766

NVM Rebuild: ##777464

<>


---------------------------------------------------------------------
-----------

Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)



Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#



Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code



Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code



A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr







<>


---------------------------------------------------------------------
-----------

Huawei ETS-668, 678, 688, etc Nam Programming:

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu







<>

Ericsson A1228c, T61, etc Nam Programming:

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu



Sony-Ericsson T608 Nam Programming:

Nam Set: 923885, Joystick to the right, 111111







<>


---------------------------------------------------------------------
-----------

Epsilon vc-5x Nam Programming:

Nam Set: **147258963##

Programming1: **1232580##

Programming2: **321456987##

Version: **1470963##

Debug: **000000##

Menu_1: **078987##

Menu_2: **1234756##

A-key: 2539**

Reset: **14789##







<>


---------------------------------------------------------------------
-----------

VK-100C, 110C, 200C, etc Nam Programming:

Nam Set: 153147539741593

Test Mode: 153147539123258 (88 - clear efs)







<>


Z510, Z710i(gcd-456) Nam Programming:

Nam Set: Menu+0+Spc







<>


---------------------------------------------------------------------
-----------

AMC450 Nam Programming:

Nam Set: *74269#*748#96148063+SEL







<>

Gtran gcp-2000 Nam Programming:

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc



Gtran gcp-5000 Nam Programming:

Debug Mode: 01#727+Spc

Test Mode: 01#765







<>


---------------------------------------------------------------------
-----------

PANASONIC TEST MODE:



Panasonic (Most):

1) Turn on the phone. Press #7764726# choose SEND

2) Scroll down to where it says "NAM 1" and choose OK. Scroll down

to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"

and choose EDIT.

3) Press 1 and choose OK then choose BACK. The phone will say

"Back To Level 1" choose YES. Now choose EXIT the phone will ask you

"Exit And Save Change" choose YES.

4) Signal strength is the top right number on the screen.

5) To turn off the test mode follow the above sequence except press 0

instead of 1 at the "Built-In-Monitor"







<>
---------------------------------------------------------------------

Synertek S200 Nam Programming:

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save



<>


---------------------------------------------------------------------
-----------

Sony CM-M1300, 3300, Z200 Nam Programming:

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc




---------------------------------------------------------------------
-----------

Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
Samsung A500

1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note:
SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete

Qualcomm:
QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC
typed by user.
QCP 1960 and 2760
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete

LG:
LGC-300 programming: menu + 9 and enter SPC: "000000" or may be
other SPC typed by user
A-Key: press STO for some time while you can see special code enter
zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be
other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may
be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be
other SPC typed by user.
A-Key: type 2539** and enter A-key
LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200

1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and
press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete
LG5350

1. Enter ## and enter the OTKSL and press the left soft key under
the word "Save"
2. At the Service Program display select Mobile Phone # and press
the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key
TP 2100
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete
TP3000

1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete
TP 5250

1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete
LG V111(DM110)
[menu]30.
After ask lockcode, enter: 843691.

Ericsson:
Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC
typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu

Hyundai:
HGC-120E / -130E programming: #86904**89397#
HGC-600E programming: ##20022002, END and enter SPC: "000000" or may
be other SPC typed by user.

Sony:
CM-M1300/3300/Z200 programming: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC
typed by user.
Sony CM-M1300

1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service security code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier's system ID (SID) without the zeros
(Example: if your carrier's system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete



Motorola:
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)
Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The "User Activation" screen
will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The "User Activation"
screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key
Motorola Phones (ALL)

1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again – programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key
instead of FCN.

Nokia:
5185/6185 programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#
Nokia 6185-5170

1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete
Nokia 3585

1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key
to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display
is empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming. Press the upper
right hand soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.

SK Teletech:
SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#

Getrun 2000:
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE
(000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)

NEOPOINT:
Neopoint 1000
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete
NEOPOINT 1600
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you
for the code)
at the "preferences" screen to access the "Service" menu (Default
code is "000000")
5. Scroll to "Programming" - press "Select" - the phone will ask for
the "Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone
will reset




---------------------------------------------------------------------
-----------

Audiovox:
Audiovox 9100
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming

Handspring TREO:
1. Open the flip and press the PHONEBOOK button one time to display
the dial pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN in the phone number field
using the numbers on the device keyboard
5. Put a check in the Enable Number Portability box and type the
MSID in the MSIN field
6. Press OK
7. The device will display the network search pop-up and return to
the Phonebook display

Hitachi P300:
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #. Press
the OK soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK
soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft
key.
6. At the Save prompt press the OK soft key. The next display will
show several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.

Kyosera:
Kyocera 2345 1135

1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming
Kyocera 6035

1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.
Kyocera 3035
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key (Navigation key is the button located
between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the "clear" key (arrow
key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation
key
13. Press END. Programming is complete.
Kyocera 2255
1. Press the 1 key six times (111111) "Option will be highlighted
2. Press OK
3. Scroll down to "Programming" and press "OK"
4. Enter OTKSL and press the navigation key
5. "Service Options" will appear scroll down to the "Basic NAM1 Info"
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.
QCP 2035
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press ç key
7. Press ç key again to exit - Programming is complete

Sanyo:
Sanyo 4000 4500 4700 5000 6000
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed – press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete
Sanyo 5150 5300 and 6400
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile
Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete
Sanyo 6000
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete
Sanyo 4900
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK
key.
8. Programming is complete
Sanyo 6200

1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete

Toshiba:
Toshiba 2032P
1. Slide the Radio Standby Switch on the left side of the device to
the upper side (ON) to activate the phone function. This is the
switch with the phone icon over it
2. After power up is completed use the stylus to tap on the ADMIN
pull up menu at the bottom of the screen and select ACTIVATION
WIZARD. If your device has not yet

been activated the ACTIVATION WIZARD will automatically start when
you turn on the radio in your device.
3. Tap NEXT 3 times. If the device has been previously activated it
will require only 2 presses.
4. On the fourth screen enter the 6 digit OTKSL using keyboard
5. Enter the MIN in both entery fields then tap NEXT
6. Wait for the device to initialize and display "ready to connect"
7. To initiate IOTA tap the word ADMIN at the bottom of the display
and then Data Provisioning
8. Programming is complete
*******
Here is a list of various codes to try out. Some may require an MSL
to be able to make full use of the functionality.
##2769737 [##BROWSER] - MiniBrowser Settings (2G)
##8626337 [##VOCODER] - Set Vocoder
##3282 [##DATA] - Setup Menu for Vision handsets
##8463 [##TIME] - Airtime Menu
##040793 - Debug Menu
##786 [##RUN] - Technical Information (be careful with this one, you
can reset the handset)
##932 [##WEB] - IP Address information (2G)
##889 [##TTY] - TTY On or TTY Off
##4357 [##HELP] - Help



alcatel


Master Codes
- 25228352
- 25228353
- 83227423 (TH3/4,BH4,BF5,BG3,BF3/4..)
###337*07# - master reset (with SIM)
###847# - factory reset (with SIM)
Alcatel 835 formating - **0102#



enol

mıtsubıshı

*#987*00# - Service menu
*#987*99# - Full reset
*#900# - SW version


fly bird


S688 - #*301#02# send - with SIM
menu:
7 - 10 - ok,

#*8000#, #*3676# (reboot repair)



V09, S1180 - *, 3 times down, 3 times up - service menu

huawai


MASTER SECURITY CODE
-309296
-3092
-9296


lg

2945#*# - service menu (code reset)(W3000 G5300 C1200 G7100...)
2945#(*)- hold (LG 500,600)
B1200 *+pwr, 6,6,8 Service Menu
B1300 *+pwr, 1,5,9 Service Menu

Security Removing Code For Lg 8110,8120.
47328545454#
Or
277634#*#


maxon

*#9922# - menu, reset (without SIM)
*#9900# - Software Version
*#9901# - Software Version (PBatch)






mıtsubıshı

hold * 476989 NS Lock Menu
hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level
hold * 3926 Shut Down...

*#0048# fast change polish langpack
*0000# automatic language

*850696 Warmstart

Eclipse:

hold * 65512890 eeprom reset - cure for hangs ect.

*65512890 (*-hold) format FFS (Eclipse)
* 3926 - (*-hold) test mode
* 5806 - (*-hold) SW version
*(hold) 787090 - trium 320 unlock menu



motorola

(T190, T191, T205) master code
- 19980722
- 20010903
**********
P2K test menu:
*#06#, menu, menu, 048263*



Test comands:
32*116*1*0*0 - read phone code
32*118*1*0*0 - read security code
18*0 - factory reset, phone code off
18*1 - master reset
54*18*1 - full phone reset
10*0*6 - select 900/1800
32*279*1*0*8 - model
32*383*1*0*0 - flex version

Hard reset MPX200, MPX220 - blue button + power on


panasonıc

*01763*737381# - master reset (user data, user code) A100, A101,
A102,G50, G51, G70, GD55..
*369#(*) - MENU

7, 4, 6, menu, menu - lock menu
*#9999# - 5 sec after power on - SW version (GD75, GD67, GD87..)



pantech


*01763*737381# - master reset (user data, user code) without SIM
*01763*8371# - SW version
*01763*6371# - UNLOCK
*01763*3641# - Menu


Pantech HX-550C (cdma)


Pantech HX-550C (cdma)

Full reset (phone code reset)- ##03*934#9367*192#397#7412569746 PWR,
after reset - ##27732726 PWR and select "with uim"


phılıps

#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset



samsung

*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST
*#8999*8378# - Service Menu (X100


sharp

for 2G sharp phones(some of them works on 3G also)
*01763*278257# Assert Fail Log clear
*01763*2783771#
*01763*2783772#
*01763*2783773#
*01763*2783774#
*01763*2783775#
*01763*3640# disable Engineering Mode
*01763*3641# enable Engineering Mode
*01763*4634# IMEI
*01763*5640# disable LOG
*01763*5641# enable LOG
*01763*6365641#
*01763*6370# disable MEP menue (unlock menue)
*01763*6371# enable MEP menue (unlock menue)
*01763*63866330# disable NetMode
*01763*63866331# enable NetMode
*01763*753371# Sleep Check
*01763*8371# Firmware Version
*01763*8781# Test #1
*01763*8782# Test #2
*01763*8783# Test #3
*01763*8784# Test #4
*01763*8785# Test #5
*01763*8786# Test #6
*01763*8787# Test #7
*01763*87870# Test #70
*01763*87871# Test #71
*01763*87872# Test #72
*01763*87873# Test #73
*01763*87874# Test #74
*01763*8788# Test #8
*01763*87891#
*01763*87892#


vk mobıle

*#79# - SW version
*#85*364# (*) - hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)



voxtel

0124 - master code
0718#(*)- hold - menu (ST11, SC10, V100 without SIM)
4268#(*)- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, V300, RX100 without SIM)




To check lock type in TSM3/4/5/5m?
Turn ON the phone and type: *#9917#

To enter Unlock Code in TSM100?
Type: ****987 + Call

To Enter Unlock Code in TSM100v/TSM30?
Type: ##**9987 + Call




Unlock procedure Hp IPAQ 6315:

1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap Shift + Ctl key to enable the keys.
4. Tap the area below the band selection box to open the unlock
tool.
5. Tap Shift + Ctl to disable the keys.
Shift +Ctl keys
disabled
Shift + Ctl keys
enabled

6. Enter the 8-digit unlock code and tap OK when done.
7. Wait for the device to validate the unlock code (about five
seconds). You will see one of the following screens:
-Unlock successful.
-Unlock failed due to incorrect code. The user has three attempts to
unlock. After three attempts, the device will refuse any more
unlocking attempts. Perform a soft reset to

reset the counter to perform additional unlocking attempts.
-Device is not ready for unlocking. This error message displays when
the user tries to unlock when the phone application (not the device)
is not in a steady state. It takes 30

seconds after powering on the phone for it to reach a steady state.



To view IMEI (International Mobile Equipment Identity) number enter
*#06#
Alcatel 501 Codez
Init codes:
###847# Reset to factory defaults (danger...)
###337*07# Phone restart

Language selectors:
*#0000# Automatic
*#00xx# xx= 07,27,41,44,61,63,64,84,91,92,94 English
xx= 43,49 Deutsch
xx= 48 Polski
*#0420# Czech
*#0421# Slovak

** unlock

-Master code :

Alcatel HD1, HE1 : 25228353
Alcatel BE1, BE3 : 25228352
Alcatel BE4, BE5 : 83227423


-Lock/Unlock codes:
(ask your Provider for network codes... )
###765*02# Add
###765*78# Deactivate
###765*05# ?
###765*07# Erase
###765*08# Unlock

-Removing SP lock on Alcatel Easy
This is how to remove the SP lock on Alcatel (one touch) Easy.
(You wil need a cable, a eeprom device and some sw)

Edit the eeprom:

Address Replace with
------------- ---------------
176h FFh
177h FFh



BENEFON Q TGP75EU Finland


Memory chip:
24C256
Security code don't CRYPTED.
Security code area starts at :
03A1h-03A9 "Security Code" 3233353800000100 =(2358)
2 3 5 8 -> Sec code
Tested with sw : 2.2X3714H DATE


FOR Benq m300
*#300# send = sw ver...
*#301# send = manual test


Sony CMD-X1000 Secret Codes

IMEI Nummer = *#06#

Monitormodus = Menü Geräteinformation,zweimal linke
Navigationstaste, 7684666, zweimal rote Hörertaste

Softwareinformationen = Sim-Karte entnehmen,*#06#, linke Softtaste

Palmenbild = unter "eigenen Rufnummer" *12022243121 eingeben



Sony CMD-X2000 Secret Codes

IMEI Nummer = *#06#

Monitormodus = Menü Geräteinformation,zweimal linke
Navigationstaste, 7684666, zweimal rote Hörertaste

Softwareinformationen = Sim-Karte entnehmen,*#06#, linke Softtaste

Palmenbild = unter "eigenen Rufnummer" *12022243121 eingeben



Sony CMD Z1 Secret Codes

IMEI Nummer = *#06#

Softwareversion = *#8377466#



Sony CMD Z5 Secret Codes

IMEI Nummer = *#06#

Softwareversion = *#7353273#

Simlock Status = *#7465625#


Sharp TM150 :

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER1#) --- Firmware Version
-----------------------------------------------------------------

sharp reset EEP

1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off


Sharp GX-10 unlock solution

With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked

Sarp Gx15/20/30 Tm100

Phone is on test mode
you can see **** on phone display
For finishing unlock folow the next steps :
Press 1 on phone keypad
Press 99
Press right top key
Press 3 FOR UNLOCK
or Press 1 FOR FACTORY DEFAULT
Press roight top key
Wait to see on display format ok
Press right top key 3 times or more until phone is off



E710/715
*#32436837# DAI ON Digital Audio Interference On
*#3243948# DAI OFF Digital Audio Interference Off
*#9324# MONITOR
*#0746# SSMS MEMORY:20
*#0842# vibra on
*#0289# buzzer on
*#4357# HELP (4357) This screen!!!!!!!
*#7777# verze SW
*#8888# verze HW
*#9999# Revize HW
*#0782# cas provozu, zapnití a vypnití - LIVE TIMER
*#0523# 41 (80) menu: 12
*#0638# SIM: f23003 F230 030
*#0778# SST size: 10
*#9273696# Java D/L setting
*#92782# Wap user agent
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm - YAMAHA OK
*#0778# Sim Service table
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)


E700/S500 100%..... X100/X600???!!!???

#*566335# Wap model ID
#*5663352# java model
#*5663351# model
#*53696# java download mode
#*536963# serial enabl others disabled
#*536962# HTTP enabl WAPSAR disabled
#*536961# WAPSAR enabl HTTP dis
*663867 MF file dumped
*335 All MMS mes deled
*2767*77667# Spain MMS settings
*2767*78667# Portugal
*2767*65667# Netherland
*2767*29667# Czech
*2767*28667# Austria
*2767*48667# Italy
*2767*37667# France
*2767*85667# Uk
*2767*33667# Germany

*2767*73738927# MMS Reset????


*2767*77927# Spain WAP Setting are applied
*2767*78927# Portugal
*2767*29927# Czech
*2767*65927# Netherlands
*2767*28927# Austria
*2767*37927# France
*2767*48927# Italy
*2767*85927# Uk
*2767*33927# Germany

#7263867# Ram Dump On

#*3232# Current Mode - DCD mode
#*3231# DCD en TRACE dis
#*3230# TRACE en DCD dis

#*7247# ??????
#*3683# ??????
#*3777# ??????
#*3779# ??????
#*8645# ??????

#*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt

*#7465625# Stav zámku

#7465625*28746# Aktivní zámek deaktivován
*7465625*28746# Automatický zámek perzonalizován
#7465625*2827# Zámek Auto CP deaktivován
*7465625*2827# Zámek síte se musí aktivovat
#7465625*2877# Zámek Auto SP deaktivován
*7465625*2877# Zámek síte se musí aktivovat
#7465625*28782# Automatický zámek podskupiny deaktivován
*7465625*28782# Zámek síte se musí aktivovat
#7465625*28638# Automatický zámek síte deaktivován
*7465625*28638# Automatický zámek síte perzonalizován

#7465625*228# Aktivní zámek deaktivován
*7465625*228# Aktivní zámek perzonalizován

#7465625*746* ???????
*7465625*746* ???????
#7465625*27* ???????
*7465625*27* ???????
#7465625*77* ???????
*7465625*77* ???????
#7465625*782* ???????
*7465625*782* ???????
#7465625*638* ???????
*7465625*638* ???????

*#8377466# SW + HW info

*#8888# HW info
*#9999# SW info
*#8999*8376263# komplet info

*#8999*636# IPD info

#*2677# ARM state: None
#*0000# ??????

*#8999*324# Net monitor??

#*6200#
#*6700#
#*6900#
#*7200# neplatná úroven prístupu
#*6100# command #*6100# Executed

*2767*3700# SGH-E700 BSI
*2767*7100# SGH-S100
*2767*8200# SGH-V200
*2767*7300# SGH-S300

#0111*codigo#

*2767*637#
*2767*688#
*2767*wap#
*2767*media#
*2767*mms#
*2767*226372# Camera Reset
*2767*688# MEP off
*2767*927# WAP
*2767*2878# E2P Custom reset
*2767*3855# E2P Full reset
*2767*2878# Sec reset

#*7828# C??? Midi Ri51
#*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff

#*2562# nejakej reset
#*2565# no blocking General Defense
#*3353# General defense Code Erased

#*3837# reset ???????
#*3849# reset ???????
#*3851# reset ???????
#*3876# reset ???????
#*7337# reset ???????
#*5376# reset All SMS Deleted

#*7222# Operation Typ: Class C GSM
#*7224# Error!!!!
#*7252# Operation Typ: Class B GSM
#*7271# multi Slot Class 1 GPRS
#*7274# multi Slot Class 4 GPRS


#*2787# CRTP on - Batery options
#*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0
#*3825# Command #*3825# Executed
#*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40
#*7288# GPRS Detached
#*7287# GPRS Detached
#*7666# SrCell data RAC 255 NMO 255
#*7693# Sleep Deact
#*7284# Class B
#*2256# Calibr - info
#*2286# DATAbattery
#*2527# GPRS switching set to class 4
#*2679# Copycat feat. Activated
#*3940# External looptest 9600bps not avalible in SYSOL2!
#*4263# handsfree mode Activated
#*4700# Half rate deact
#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in
cihard.opt
#*8462# Sleeptime sinc SwitchOf
#*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt
#*3370# EFR Deact
#*3941# External looptest 115200bps not avalible in SYSOL2!
#*5176 L1 Sleep TOI N:5 TOI P:0
#*7462# SIM phase 3
#*7983# Voltage/Freg Deact
#*7986# Voltage Activated
#*8466# Old time
#*2255# Call failed mode: Command not Implemented

#*2285 nic
#*46539 nic
#*5143 nic
#*7629 nic
#*7646 nic
#*7665 nic
#*7633 nic
#*7626 nic
#*5174 nic
#*5175 nic
#*5177 nic
#*5156 nic
#*2282 nic
#*5132 nic
#*7276 nic
#*2355 nic
#*3333 nic
#*3377 nic

#*5187# L1C2G trace Activated
#*6837# Official SW version: 120107A1
#*7524# KCGPRS: +data
#*7562# LOCI GPRS: +data
#*7638# RLC allwazs open ended TBF Actiated
#*7632# Sleep mode Debug: +data
#*7673# Sleep mode RESET
#*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED
#*2474# For Cmd set DEBUGBATTERY in cihard.opt
#*2834# Audio Pth Mobile Normal
#*3270# DCS support Deact
#*3282# Data Deact
#*3476# EGSM Deact
#*3676# falh volume formated
#*4674# IMSI: +data
#*4760# GSM Activated
#*4864 pro tento model nic
#*5171 data
#*5172 data
#*5173 data
#*7326# Accessorz: vibrator
#*7676# Command #*7676# Executed
#*7683# Sleep variable
#*7762# SMS Bearer CS Activated
#*7957# Command #*7957# Executed
#*8465# Time in L1 +data
#*9278# Command #*9278# Executed
#*9795# WTLS key Reset
#*2252# Current call: +data
#*2836# AVDDSS Managment Deact.
#*3877# Dump of SPY trace: +data
#*7728# RSAV done




PHILIPS DIGA *#06# IMEI
*#3333*# Blocking list
*#2558*# All time connected
*#3377*# IMEI,FLAGS,SIM LOCK
*#7489*# Security code ???
*#3353*# clear Blocking List


PHILIPS FIZZ *#06# IMEI
*#8377*# Software version
*#1234*# Security code
*#5644*# Service code


PHILIPS SPARK *#06# IMEI
*#2254*# Status register
*#2255*# Some kind of monitor mode during dialing.
*#2558*# Time connected to net.
*#2562*# ??? number of reconnections
*#2565*# Warm restart
*#3333*# BLOCKINGLIST
*#2377*# ???BERR Phone waits random time and reconnects to network.
*#3377*# Information, SIM-lock
*#7378*# SIM info
*#7489*# SECURITY CODE
*#7693*# Sleep mode
*#7948*# Turn off phone
*#8463*# Information on sleep mode


PHILIPS GENIE *#06# IMEI
*#2254*# STATUS REGISTER
*#2255*# Some kind of monitor mode during dialing.
*#2377*# ???BERR reconnect?
*#2355*# Near Cell Mode. U can see parameters of three nearest cells
*#2558*# Time connected
*#2562*# number of reconnections
*#2565*# Warm restart
*#2772*# Base Station Paging Multiframe.
*#2847*# HIDDEN MENU!: 5.5:Closed User Groups
*#3333*# BLOCKING - list
*#3353*# clears Blocking list
*#3377*# SIM LCK
*#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0
*#4377*# ??? battery charging ???
*#7378*# SIM phase
*#7489*# Security code
*#7693*# SLEEP-mode
*#7948*# Turn off



- GD55/G50/G51/G70/A100/A101/A102/X300: with or w/o SIM press *#369#
and go to menu ¡°SW Version¡±
- GD67/GD87/X60/X66/X100/X200/X400/X500: with SIM press *#9999#
while phone searching for network
- X200 : with SIM press #02# while phone searching for network

- X6X : Power on the phone with valid sim card and tape this code :
52824**
then tape 746, Menu, Menu then enter your code




Nokia 3110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000# bzw. *#9999# bzw. *#3110#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Werkseinstellungen *#7780#

Simlock info *#92702689#



Nokia 3210 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#



Nokia 5110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4



Nokia 5120 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4



Nokia 5130 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4



Nokia 5190 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4



Nokia 6110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#



Nokia 6130 Secret Codes

IMEI Nummer *#06#

Software Version *#9999#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92772689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

6. Seite insgesamte bisherige Telefonzeit (min)


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#



Nokia 6150 Secret Codes

IMEI Nummer *#06#

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#



Nokia 7110 Secret Codes

IMEI Nummer *#06#

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data




Nokia 8110 Secret Codes

IMEI Nummer *#06#

Software Version *#8110#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


Testmodus aktivieren *#746025625#



Nokia 8148 Secret Codes

IMEI Nummer *#06#

Tastensperre MENÜ + *

Lautlos MENÜ + #



Nokia 8810 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Seriennummer *#92702689#

1. Screen Herstellungsdatum

2. Screen IMEI

3. Screen Kaufdatum

4. Screen Letzte Reparatur




Nokia 9000 Secret Codes

IMEI Nummer *#06#

Software Version *#682371158412125#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Firmware-Datum *#9999#



Nokia PT11 Secret Codes

IMEI Nummer *#06#

Software Version *#9999#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons




Nokia PT11NF Secret Codes

IMEI Nummer *#06#

Software Version *#170602112302# bzw. *#682371158412125#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Firmware-Datum *#3283#








for NEC
IMEI *#06#

Version * # 2820 #
hardware reset *73738# (send?)
Lock info * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
SIM LOCK
*#4960 # (send?) - info
*4960*pass*pass#(send?) -lock
#4960*pass#(send?) -unlock

pass is 8 digits

Lock Status * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock



code for repair n21 n22 n223
*#3727372#







FOR MITSUBISHI
*#06# View IMEI
*#0044# English
*#0049# Deutsch
hold * 4329 Net Monitor1
hold * 621342 Net Monitor2
hold * 5472 M4 Testmode
hold * 5806 SW version
hold * 5807 HW version
hold * 936505 SW and HW version


hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level


Firmware Press and hold C, enter 597, release C
secret menu Press and hold C, enter 987, release C.Press OK
debug mode Press and hold C, enter 397, release C
phase-2 mode Press and hold C, enter 499, release C
Turn off phone Press and hold C, enter 999, release C



for MAXON
*#9917#
#9917*network code#
#9917*part IMSI#
#9917*simlock SLPUK#
#9917*IMSI#

SG1000 Master Code Unlock 24681357
SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)
this code is for enter in serviçe menu *#*#1705#


FOR LG
secret code for U8130 & U8138
47328545454#
-------------------------------
To see version on LG 81X0
277634#*#
To enter unlock code :
2945#*88110#

IMEI (ALL): * # 06 #
IMEI and SW (LG 510): * # 07 #
software version (LG B1200 ): * 8375 #
recount cheksum (LG B1200 ): * 6861 #
factory test (B1200): #PWR 668
unknow (LG 500 ): 8060#*
unknow(LG 200 ) *789# + send
unknow (LG 500 ): 9270#* and 9278#*
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600 ): 2947#*
lg 5300 :2945#*5301#

how to read data calcfor LG510w:
just read button not read cal. data
adress: 0x1000004
size: 0x438
then read.




master code for siemens SX1 punch these code
*#0003*66206168#




Sedo X, Phone malfuntion and need to be formated Use
*#7370#


Motorola p2k Flash mode press
*+#+Power



[AUDIOVOX]
---------------------------------------------------------------------
---
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl Nam Programming:
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc
Audiovox 8610, 8910, etc Nam programming:
Name Set: ##847446, end, 111111
Audiovox-107 Nam Programming:
Nam Set: 45680*47*869#1
Audiovox CMP-3 Nam Programming:
Nam Set: 45680*47*869#1
Dm Mode: Menu, 6, 6
Audiovox 9950 Nam Programming:
Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming:
Nam Set: m + # + envelope key + * + 1
Audiovox Thera (Toshiba 2032) Nam Programming:
Thera Nam Programming User Manual - nam_thera.pdf
AUDIOVOX TEST MODE:
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
"FSC Code", press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of
the screen.
3) To turn off test mode shut of the phone and then turn it back on.





[EPSILON-COMPAL]
---------------------------------------------------------------------
-----------
Epsilon vc-5x Nam Programming:
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##




Ericsson A1228c, T61, etc Nam Programming:
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu
Sony-Ericsson T608 Nam Programming:
Nam Set: 923885, Joystick to the right, 111111



Gtran gcp-2000 Nam Programming:
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc
Gtran gcp-5000 Nam Programming:
Debug Mode: 01#727+Spc
Test Mode: 01#765


Huawei ETS-668, 678, 688, etc Nam Programming:
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu


Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)



Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#



Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code



Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code



A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr



Qualcomm qcp-800 Nam Pogramming:

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc



Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok



Tips:

On some kyocera handsets the factory service module has not been
disabled

and the phone can be programmed without the spc by inputting.

Nam Set: ##333333 menu (service)